Turn your Smartphone into a FPV Monitor or FPV Goggles with Android OTG FPV Receiver Module:
BUY HERE for $18.79 with Coupon: rc18off
You can get one cheap VR goggles HERE to put your phone in and Turn it into a DIY FPV Goggles with a good Monitor:
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
BUY HERE for $13.96 with Coupon: rc18off
ATTENTION! THIS IS HEAVY (8g) FOR H101, IT IS NOT RECOMMENDED! I RECOMMEND NEW LST S2 AIO FPV CAM which is 3.6g only!!!
$11,99 ONLY!!!
CLICK TO SEE NEW LST S2 AIO FPV CAM (3.6g only!!!)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
If you don't have a H101 it is out of stock now, sorry. But you can get a FuriBee F36 to make a Tiny Whoop FPV quad using the LST S1 and OTG FPV Receiver.It is for 12.99$ Now HERE
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
TEST VIDEO:
REVIEW
LST - S1 AIO 800TVL CMOS Mini FPV Camera
This camera is a All in One very light(only 8g) and mini FPV Camera set which includes a 800TVL CMOS Camera, a 40CH 25mW VTX and a 3dBi Whip Antenna. It have a metal case to protect it, which is very light. And because of whip antenna is elastic and can be rotated 180 degree freely, it will not break easily as clover leaf antennas used in alternatives. So it is an important point, I think. Also it has good specifications and it has a very good price with coupon rc18off. Only $13.96 ! Test videos are below, you can see the FPV footage videos at the end of the video. I recorded them with FPViewer app on my Galaxy S7 phone, recording quality was not at the highest, I used default settings, one time I have set to high quality but I don't know which one, all looks very similar. The quality is enough for FPV flying, I think. With a smartphone which has a good screen, it gives better results w.r.t cheap FPV goggles, I think. What do you think?
It comes inside a durable box, It has a button to change settings. Comes with a mini instructions manual:
FPV footage screenshot:
Main Features:
- Ultralight, only 8g with metal case. Camera, video transmitter and antenna are integrated
- 800TVL HD, 5.8G real-time image transmission within 500 - 700m range ( in open air )
- Enjoyable wide angle of view, i.e. 150-degree FOV and 170-degree DFOV
- The unbreakable 3dBi whip antenna can be rotated 180 degree
Specifications:
FPV Camera
Sensor: 1/3 inch CMOS
Lens: M8 800TVL
Angle: 150-degree FOV, 170-degree DFOV
Video format: NTSC / PAL ( switchable )
Power consumption: 380mA at 3.7V
Input voltage: 3.6 - 5.5V
Lens mirror diameter: 2.1mm ( IR coated )
Video Transmitter
Video format: NTSC / PAL ( switchable )
Output impedance: 75 ohm
Output signal strength: 23 - 24dBm
Output Power: 25mW
Channel: 40
Antenna: 3dBi
Operating voltage: 3.6 - 5.5V
Operating current: 100mA
Audio carrier: 6.5MHz
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
5.8G 150-channel UVC FPV OTG Receiver Module with Auto Scan for Android Smartphone, Tablet (need UVC Support)
With this gadget it is possible to Turn your Smartphone into a FPV Monitor or FPV Goggles! It gives low latency around 0.1sec [TESTED, Confirmed] and good range 1 - 2km ( also depending on the transmit power and antenna ) [NOT TESTED]. You can also connect to windows notebooks or using av out to the fpv monitors if your phone is not compatible. It has auto scan feature.
ATTENTION!! NOT COMPATIBLE WITH ALL SMARTPHONES!!!
Your phone must be support UVC video function to be able to use this module! Check the list below. If it is not in the list it may also work but it is not guaranteed, you can to check it with this apk Download HERE or with a UVC device like webcam or endoscope camera etc and using Go FPV app.
List of UVC supported devices:
I used FPViewer app on my Galaxy S7 phone. You can download it from Google Play Store. You can also use other apps like GoFPV, Pocket FPV etc...
The cable came with the receiver has one way connection! The connector with the arrow logo need to be plugged to the receiver side.
Main Features:
- Automatically scans the 150 channels in 5.8G, higher precision
- OSD function enables you to know the real-time flight status
- One-key operation. Easy to adjust the signal value and input power
- With plastic case - more affordable and economical
- Micro USB port for connecting to smartphone / tablet
- AV output port designed for connecting to an AV monitor
Specifications:
Frequency: 5.8G
Channels: 150
Interface: micro USB type-B, RP-SMA female, AV output port
Antenna interface: RP-SMA male
Cable length: 24.2cm ( including connector )
Receive distance: 1 - 2km ( also depending on the transmit power and antenna )
App name: Go FPV
Download: Google Play
System requirement: Android 4.3 or above, Windows 7 / 10
0 yorum:
Yorum Gönder